This is an assembly guide for my WLToys 12428 crawler conversion project (SCX10 clone). If you have questions about a standard SCX10, you can download the Axial manual from their website. One important note, friends. Most people who build a crawler want to make it their own. That's the thinking behind this project, so you're probably going to want to do a bit of tweaking to get this thing just the way you want it. My thought was that this would be a cheap way to make a crawler for a person with a WLToys 12428 or a bunch of parts kicking around. If you are starting from scratch, you may want to order a cheap Injora crawler chassis or buy something like a Redcat Gen 8 (the Redcat is a bargain where I live but lots of other crawlers are decent). Personally, I think a lot of crawlers are kinda pricey for what you're getting, but without any drive train parts you can't really build a reliable RC car of any kind (IMO). 3D printed gears are a big waste of time unless