Wrench To Drive RC Car Resource

 W2D VI: 3D Printed Truck Body Build Guide Image 1:  The Truck Image 2:  General Assembly BOM link  (Bill of Materials) You can use a lot of my past stuff with this project so feel free to explore my Thingiverse.  Here's a few of the big items: W2D-VI version 1:   https://www.thingiverse.com/thing:4903157 W2D-VI version 2 (This truck):   https://www.thingiverse.com/thing:5276273 Jeep Cage (pretty compatible):   https://www.thingiverse.com/thing:4610573 Jeep Body (seats):   https://www.thingiverse.com/thing:4671977/files YouTube Video:   https://www.youtube.com/watch?v=BUi60u7aqNE I mention "welding" a lot.  Welding means using a 3D Printing pen as a plastic welding tool pretty much just like welding metal.  Hot glue, welding and electrical tape are my best friends when it comes to assembling body parts.  Tacking something together means using a couple of dabs of hot glue or plastic welding to tempo...

 W2D-VI BOM The BOM starts with the core body parts, then the cab, then various other bits.  I tried to make sure that the parts with "or" options are separated logically from non option sections of the list. If you go with the not "or" versions you get the body as I built it except: - I used the old windshield and did some grinding to make the cab fit and no dash - I used the Cab_Back_Vd.stl because it mates up with the roll bar (I had already welded the roll bar and didn't want to remove it) - I used the shorter rear quarter but I would recommend using the longer one for a TRX4 build Please think it through... I would suggest cutting and pasting the BOM into your own document and then deleting the parts you don't want to use (or move them to the bottom of the document for future reference). Body: 1x Bronco_Nose.stl 1x Bronco_Grill.stl 2x Bronco_Headlight_Bucket.stl 1x Bronco_Hood.stl 1x Bronco_Dash_V2.stl or original dash     1x Bronco_Dash.stl      ...